![Gear Pinion Helical - 30T, Modula 1.0 - 14mm Bore Hole](http://www.rovercnc.com/cdn/shop/products/pinion_IMG_20171101_151307_grande_35f37127-750a-4908-9485-3d1b5078a97e_{width}x.jpg?v=1615491767)
Precision CNC gear pinion for the racks. They are helical tooth made out of ground steel, and pre-drilled for 2 set screws at 90 degrees and hardened. The pinion specs are:
- Bore Hole 14.0mm
- Modula 1.0
- Helical Tooth
- Hardened Ground C45 Steel
- Pre-drilled Bore Hole (Please select the correct bore hole required)
- 20 Degree Pressure Angle
- 2 Set Screws at 90 degree
- OD = 32mm
- Flange OD = 20mm
- Total Width = 25mm
- Teeth Width = 15mm