MACH4 USB 4-Axis Motion Controller Motion Controller
ID: 11810383701

  • $289.00 USD

Only 3 left!

WiXHC MK4-M4 4-Axis Controller
MACH4 Support, USB, 2000KHz, 4-Axis Motion Control Breakout Board, Supports
The best available USB controller in the market for MACH4!

What you get in this package is:
  • 1x WiXHC MK4-M4 4-Axis MACH4 Controller
  • 1 x USB Cable
  • 1 x CD (Driver, instructions)
MK4 Description
Description:This is the latest generation 4 axis Mach4 motion control card, which is the fourth generation calling MK4-M4. It could work under Mach4 software. The maximum step-pulse frequency is 2000 KHz. Now MK4-M4 is stronger, more stable and better performance than other version.

Features:
  • Dual-Processors, ARM+FPGA, More processing power
  • Support all versions of Mach4.
  • Work under Windows 32-bit operating system (not including Mac OS)
  • Support spindle speed feedback function.
  • USB jack does not need to install the driver, plug and play under all versions of Windows.
  • Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach4 working state, USB cable unplugs and then plugs in, but also the normal connection.
  • Supports 4-axis linkage.
  • Maximum step-pulse frequency is 2000 KHz, can connect servo driver and stepper driver.
  • The indicator light indicates various working status, such as USB connection, Mach3 connection and so on.
  • 16 input IO, 8 output IO, Supports extended I / O control.
  • Onboard isolated power supply, not need external power supply.
  • All IO port fully isolated, strong anti-interference, stable performance.
  • Support spindle speed PWM output; support spindle pulse and direction output; support spindle speed output from 0 to 10V analog voltage.
  • Support XHC series of wireless electronic Mach4 MPG, such as WHB04B-4-M4 MPG.
  • With an aluminum shell, effectively shielding interference, stable and reliable performance.

MACH4 Recommended Requirements:
  • PREFERRED: 32 or 64-bit Laptop or Desktop – Using an External Motion Controller
  • Windows 10, Windows 8, Windows 7 & Windows XP
  • An appropriate external motion controller
  • Mach4 Plugin for the selected Motion Controller
  • 2Ghz CPU
  • 1GB RAM
  • Video Card with 256MB RAM(Large G-code files, especially 3D files will require a video card with 512MB RAM or higher)
  • *Use of Parallel Port for machine control only with desktop style computers with 32-bit versions of windows 7 and below.
  • 32-bit Desktop – Parallel Port Recommended Requirements
  • 32-bit version of Windows XP, Windows Vista, or Windows 7
  • Mach4 Parallel Port Legacy Plugin (cost applicable)
  • 2Ghz CPU
  • 1GB RAM
  • Non-integrated Video Card with 256MB RAM(Large G-code files, especially 3D files will require a video card with 512MB RAM or higher)

 


      We Also Recommend