Welcome to RoverCNC



V-Wheel eXtreme Solid - 10 Pack

Regular price $69.99 USD

Shipping calculated at checkout.
These solid Xtreme V's are made from very hard polycarbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better over all precision and strength for your builds.

The Xtreme V-Wheels are designed to be used as a heavy duty alternative to the Delrin V-Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin V-Wheels work great for most light load applications the eXtreme V-Wheels can be used for builds where heavier loads are required and less compression in the delrin is desired.

These have been tested at 25lbs. per wheel with no noticeable deflection. Beta testing resulted in unofficial results of 55lb.s per wheel! Many of these wheels could be added to a gantry to allow an even distribution of the load across them. Each wheel is carefully milled for consistent high precision and tolerance.

Included in the kit (you get 10 kits):
  • (1) eXtreme Solid Wheel
  • (2) Ball Bearings - 625 2RS
  • (2) 5mm Precision Shim
Part Details:
  • Material - Polycarbonate (clear)
  • Dimensions 24.39 OD x 15.974 +/- 0.026 ID x 10.23 'thick'
  • Rockwell Hardness M 75
  • Compressible Strength 86Mpa 

Don't forget to add your Eccentric Spacers to your order! The eXtreme Solid V-Wheel is great for use with the V-Slot Linear Guide System.